Edge Profiles

 

Seacliff (Z) Edge

The edge is beveled, not rounded, at the top, often referred to as an Eased profile. Shown in WINDERMERE™.

Available Depths: 2cm, 3cm, 4cm

Bryn (VF) Edge

This profile, often called a reverse Waterfall, is a traditional design with a twist. Shown in ELLA™.

Available Depths: 4cm

Idris (IM) Edge

A reversed and sharply slanted mitered edge gives this profile a dramatic appearance. Shown in SWANBRIDGE™.

Available Depths: 2cm, 3cm

Shale (1Z) Edge

This edge seamlessly integrates flush with a cabinet door creating a modern, sleek look. Shown in DUNMORE™.

Available Depths: 2cm

Mesa (QM) Edge

This edge is a traditional ornate ogee edge reversed down, giving it a modern spin. Shown in HELMSLEY™.

Available Depths: 6cm

Cascade (VFZ) Edge

Combines a reverse Ogee edge stacked on top of a straight drop modernizing the traditional edge. Shown in SUMMERHILL™.

Available Depths: 6cm

Cornice (MQ) Edge

Our fullest Ogee profile design, also called a Cove Ogee over Ogee. Shown in BELLINGHAM™.

Available Depths: 6cm

Moraine (CHISELED) Edge

For a natural, rustic appearance, choose this hand-finished profile often named Chiseled, Broken Edge or Rock Face. Shown in OAKMOOR™.

Available Depths: 2cm, 3cm, 4cm, 6cm

Ledge (MD) Edge

Fading back at the bottom edge, this profile is sometimes named a Reverse Bevel or Plater. Shown in WELLINGTON™.

Available Depths: 3cm

Boulder (FV) Edge

This profile, often called Waterfall, is one of our most ornate. Shown in GALLOWAY™.

Available Depths: 4cm

Rimrock (Mitered) Edge

The Mitered edge is an edge assembled from two pieces, to give a countertop with less weight the appearance of a much heavier one. Shown in BRIGHSTONE™.

Available Depths: 2cm, 3cm

Volcanic (V) Edge

Deeply rounded at the top and bottom of the edge, this profile is sometimes also called a Bullnose or Full Bullnose. Shown in BERWYN™.

Available Depths: 2cm, 3cm, 4cm, 6cm

Glacial (FZ) Edge

A classic Ogee profile. Shown in HARLECH™.

Available Depths: 4cm

Basin (FS) Edge

Our thinnest Ogee profile. Also called a Saskatoon Ogee or Short Ogee. Shown in PRINCETOWN™.

Available Depths: 3cm

Treeline (ZS) Edge

This angled edge is often called a Bevel. Shown in BERKELEY™.

Available Depths: 3cm, 4cm

Double Treeline (AR) Edge

An angled cut to both the top and bottom edges, sometimes called a Double Bevel. Shown in FAIRBOURNE™.

Available Depths: 2cm, 3cm, 4cm

Ridgeline (TR3) Edge

This simple, yet bold profile has a 1/8″ radius and is sometimes referred to as a double pencil edge. Shown in ROXWELL™.

Available Depths: 2cm, 3cm, 4cm, 6cm

Piedmont (A) Edge

Softly rounded on the top edge. Additionally referred to as ½ Bullnose, Demi Bullnose or a ¼ Round. Shown in WHITNEY™.

Available Depths: 2cm, 3cm, 4cm

Summit (T) Edge

Both the top and bottom edged of this edge profile are rounded. It’s sometimes called a ¼ Round Double. Shown in DARON™.

Available Depths: 2cm, 3cm, 4cm
REQUEST A QUOTE